Fitting Instructions

Standard Fitting Instructions For Telescopic

Mounting

Remove all original mounting parts.
Assemble the enclosed parts for the stem mountings as shown on the nylon bag.
Re-use original mounting parts as shown in
    Fig I: for eyering with rubber bushing
    Fig II: for eyering with steel bushing
    Fig III: for eyering with cross pin
Tighten nuts securely.
Be sure not to damage the piston rod.

Disclaimer
These instructions are intended as a guide only and Kayaba UK accept no liability whatsoever for losses which may arise out of use of these instructions. Kayaba UK customers are advised to read the instructions contained within the boxes of each Kayaba UK product and to rely on the assistance of expert fitters